14 Automatic Channel Setup (cont’d)
Adding/Deleting Channels
2
Press the PLAY 8 or STOP 9 button to select TUNER
SET UP, then press the FF :/OK button.
3
Press the PLAY 8 or STOP 9 button to select
ADD/DELETE CH., then press the FF :/OK button.
4
Use the Number buttons, the CH(annel) 8/9 button, or
the PLAY 8 or STOP 9 buttons to select the channel
you want to add or delete. An arrow will appear beside the
selected channel.
5
Press the FF :/OK button so that DELETED or ADDED
appears beside the channel number. Repeat steps 4-5 to add
or delete all the channels you wish.
6
Press the EXIT/STATUS button. Programming of the last
channel you selected will appear on the screen.
1
Press the VCR button, then press the MENU button.
SELECT , 9 CHOOSE :/OK
A CABLE/ANTENNA CABLE
AUTO CH. PROGRAMMING
ADD/DELETE CH.
TO END PUSH EXIT
SELECT , 9
124 DELETED
125 DELETED
01
– – – –
> DELETED
02 ADDED
03 ADDED
TO ADD/DELETE PUSH :/OK
TO END PUSH EXIT
SELECT , 9 CHOOSE :/OK
A VCR SET UP
TUNER SET UP
INITIAL SET UP
TO END PUSH EXIT
2-5
6
1
4
1
