43
Changing a Search Range with One of the
60 Preprogrammed Ranges
You can replace the search range with one of the 60 pre-
programmed ranges.
1. Press
FUNC
then press
SEARCH
to enter search pro-
gram mode.
PSR
and the search bank number of the
current range appear at the display’s upper left cor-
ner.
2. Press or to select the desired search bank you
want to replace.
3. Press
FUNC
then press
5
.
?SR
and the search bank
number appear at the display’s upper left corner.
Note:
After you press
FUNC
, press
5
within about 3
seconds. Otherwise, begin over at Step 1.
4. Press or to select the preprogrammed search
range.
5. Press
ENTER
to replace the search range.
Manually Changing a Search Range
Follow these steps to change the search range manually:
1. Press
FUNC
then press
SEARCH
to enter search pro-
gram mode.
PSR
and a search bank number appear
at the display’s upper left corner.
2. Press or to select the search bank number.
20-522.fm Page 43 Friday, September 17, 1999 12:46 PM
