2 SpeedTouch™ Installation
E-SIT-CTC-20030702-0003 v4.0
19
2.2.1 Installation for Mac OS 8.6/9.x
Supported Operating
Systems
One of the following OSs must be readily installed on your computer:
• Mac OS 8.6
• Mac OS 9.x
Minimum system
requirements
• 640 kilobytes (KB) of free disk space
The SpeedTouch™
installation
The SpeedTouch™ installation consists of two major parts:
• The driver installation procedure
• The hardware installation procedure
The driver installation
procedure
Proceed as follows:
1 Insert the SpeedTouch™ Setup CD-ROM in your computer's CD-ROM drive and
open the OS9 folder.
2 Open the Setup folder.
3 Depending on your Service Provider’s specifications open either the:
• WAN folder
to install a PPPoA connection
• LAN folder
to install an RFC1483 Bridged connection.
4 In this folder open the folder corresponding to your local setting (this should be
specified by your Service Provider) and double-click Installer.
5 The installation window appears:.
Make sure that Easy Install is selected in the drop-down list box. Click Switch Disk
to select your computer’s OS8.6/9.x partition if needed.
Click Install to continue.
