Ricoh R 3 Manual

A SERVICE OF

next previous

128

To change the USB communication system, follow the steps below:

1. Display the setup menu.

For the operating procedure, see P.111.

2. Press the " button to select [USB

CONNECTION] and press the $

button.

3. Press the !" button to select a

value.

4. Press the M/O or # button.

5. If the # button was pressed in

Step 4, press the M/O button.

These settings are used until they are changed the next time.

Reference

For how to transfer images using RICOH Gate La, see P.143.