40
If you are using the camera for the first time, read this section.
6
Press the MENU/OK button.
• The display indicates that the image is being corrected, and then
the corrected image is recorded. The image before correction is
also recorded.
Caution-----------------------------------------------------------------------------------------------
When [SKEW COR MODE] is selected, note the following:
• To shoot the subject as large as possible, position it so that the entire portion of the
subject is visible on the LCD monitor.
• The camera may fail to recognize the subject in the following cases:
• When the image is out of focus
• When four edges of the subject are not clearly visible
• When it is hard to distinguish between the subject and background
• When the background is complicated
• Two images, one before correction and the other after correction, are recorded. If the
number of remaining shots is less than two, you cannot shoot the subject.
Note ---------------------------------------------------------------------------------------------------
You can also correct the skew of a previously shot still image. (GP.103)
