60
Shooting
Images can be shot in the following 5 sequences in Stitch Assist mode.
Horizontally, left to right
Horizontally, right to left
Vertically, bottom to top
Vertically, top to bottom
Clockwise starting at the top left
1
Turn the shooting mode dial to .
The LCD monitor will turn on.
2
Select the shooting sequence using B or
A on the multicontroller and press
.
You can also press the shutter button directly to
shoot without pressing .
3
Shoot the first image.
The exposure and white balance settings are set and locked with the first
image.
• Compose each frame so that it overlaps 30 to 50% of the adjoining image. Try to
keep the vertical misalignment to within 10% of the image height.
• Do not include moving items in the overlap.
• Do not try to stitch images that include both distant and close subjects. Objects
may appear warped or doubled up.
• Make the brightness in each image consistent. The final image will appear
unnatural if the difference in brightness is too great.
• For good results, pan (swivel) the camera to take successive shots.
• To shoot close-ups, slide the camera over the subject, keeping it parallel as you
move.
Stitch Assist Mode (continued)
