Shooting options
70
Shooting in the dark
•
Flash options are not available if you select Self-Portrait or
Blink Detection.
•
Make sure that your subjects are within the recommended distance
from the flash. (p. 174)
•
If light from the flash is reflected or there is a substantial amount of
dust in the air, tiny spots may appear in your photo.
•
You cannot use this function when the drive mode dial is set to
Continuous, Precapture, or Bracket.
•
In some modes, you can also set the flash option by pressing [
m
],
and then selecting
a
Flash.
Adjusting the flash intensity
Adjust the flash intensity to avoid over-exposed or under-exposed
photos.
1
In Shooting mode, press [
F
].
2
Scroll to an option.
3
Press [
D
].
4
Rotate the navigation button or press [
F
/
t
] to adjust
the intensity.
-2 +2
Back Set
Flash : Auto
5
Press [
o
] to save your settings.
•
Adjusting the flash intensity may not be effective if:
- the subject is too close to the camera
- you set a high ISO sensitivity
- the exposure value is too big or too small
•
In some shooting modes, you cannot use this function.
