120
Wi-Fi settings
Set up and manage wireless access points.
1. From the
Settings
menu, touch
Wireless and networks
➔
Wi-Fi settings
. The following settings are available:
•Wi-Fi
: Touch to enable your phone’s Wi-Fi service.
• Network notification
: When enabled, notifies you when an open
Wi-Fi network is available.
• WPS button connection
: Configure new wireless networks
automatically.
2. Swipe up to
Wi-Fi networks
. The following options are
available:
•
Touch a Wi-Fi network to connect to, disconnect from, or Forget the
network.
• Add Wi-Fi network
: Manually add a new Wi-Fi connection.
3. Touch
Menu
. The following options are available:
•Scan
: Touch to search for available Wi-Fi access points. Search
results are listed in
Wi-Fi networks
.
•Advanced
: See
“Advanced Wi-Fi settings”
on page 120.
Advanced Wi-Fi settings
ᮣ
From the
Settings
menu, touch
Wireless and networks
➔
Wi-Fi settings
➔
Advanced
.
• Wi-Fi sleep policy
: Specify when to switch from Wi-Fi to mobile
data for data communications. Touch to choose from
When screen
turns off
,
Never when plugged in
, or
Never
.
• MAC address
: View your phone’s MAC address, needed for
connecting to some secured networks (not configurable).
•Proxy
: Touch to enter a proxy number.
•Port
: Touch to enter a port number.
•IP address
: Shows the Internet Protocol address assigned to this
device.
•IP
(Internet Protocol)
settings
:
–
Use static IP
: Touch to use a static IP address. When enabled, a check
mark appears in the check box.
–
IP address
: When using a static IP, enter the static IP address.
–
Gateway
: When using a static IP, enter the Gateway.
–
Netmask
: When using a static IP, enter the Netmask.
–
DNS 1
: When using a static IP, enter the DNS 1 value.
–
DNS 2
: When using a static IP, enter the DNS 2 value.
