Section 2: Understanding Your PCS Phone
2J: Using Your Phone’s Camera 103
ᮣ Brightness: Allows you to set the brightness level
automatically or manually. If manually, press the navigation
key left or right to increase or decrease the desired
brightness.
ᮣ Fun Frames: Allows you to select a frame around the image
before the picture is taken. Press the navigation key left or
right to select the desired frame. Press to select and
return to the camera mode.
ᮣ Multi-Shot: Allows you to configure the camera to take 3, 5,
10, or 15 quick pictures depending on the picture quality
setting when you press
.
ᮣ Color Tones: Allows you to select between several different
color tones including Monochrome (black & white), Sepia,
Negative, Emboss, Sketch, UV Positive, UV Negative, and Auto
by pressing the navigation key left or right. When you find
the desired tone, press
.
ᮣ White Balance: Allows you to set up the white balance of
the camera automatically or manually using the different
preset modes.
Setting the Self-timer
To activate the Self-timer:
1. With the phone open and in Camera mode, press to
select Options.
2. Press for Self-timer.
3. Using the navigation key, highlight the length of delay you
want the timer to use (10 seconds or 5 seconds) and press
. To deactivate the Self-timer, highlight (Off) and
press .
4. Press to start the timer. (A timer is displayed in the
lower left portion of the main LCD during the self-timer
countdown.)
5. Get ready for the picture. When the timer is down to 3
seconds, the Self-timer icon will turn red and the phone
will begin to beep.
