
3
Technical Specifications
Samsung SSD 840 PRO Series
Client PCs, Enterprise Computing
†
SATA 6Gb/s (compatible with SATA 3Gb/s and SATA 1.5Gb/s)
Samsung Toggle DDR 2.0 NAND Flash Memory (400Mbps, 2xnm/1xnm)
256MB (128GB model) or 512MB(256GB & 512GB models) LPDDR2
Max. 100,000 IOPS (256GB/512GB)
Max. 97,000 IOPS (128GB)
Max. 90,000 IOPS (128GB/256GB/512GB)
Max. 9,900 IOPS (256GB/512GB)
Max. 9,800 IOPS (128GB)
Max. 31,000 IOPS (128GB/256GB/512GB)
Max. 540 MB/s (256GB/512GB)
Max. 530MB/s (128GB)
Max. 520 MB/s (256GB/512GB)
Max. 390 MB/s (128GB)
Yes (Requires OS Support)
AES 256-bit Full Disk Encryption (FDE)
Max. 54g (128GB/256GB/512GB)
Average : 0.069W ** (Typical)
Idle : 0.054W (Typical, DIPM ON), 0.349W (Typical, DIPM OFF)
Operating:
Non-Operating:
0°C to 70°C
-55°C to 95°C
5% to 95%, non-condensing
1500G & 0.5ms (Half sine)
5 years limited (client PC use only)***
System Configuration : Intel Core i7-3770 @ 3.4GHz, 4GB DDR3 SDRAM (2GBx2) 1333Mbps; Asus motherboard with Intel 7 Series Z77
Chipset, Windows 7 Ultimate x64 SP1; IRST 11.2, MS performance guide pre-condition.
†
For enterprise usage (e.g. servers), a minimum of 6.7% over-provisioning (OP) is recommended.
* Sequential performance measurements based on CrystalDiskMark v.3.0.1. Random performance measurements based on
Iometer 2010. Performance may vary based on SSD’s firmware version, system hardware & configuration
** Power consumption measured with MobileMark 2007 in Windows 7. Values calculated using laptop PC and represent system-level
power consumption.
*** For enterprise applications, 5 years limited warranty assumes a maximum average workload of 40GB/day (calculated based on host
writes and on the industry standard of 3-month data retention). Workloads in excess of 40GB/day are not covered under warranty.