English - 5
➢
The actual configuration of your TV may be different, depending on your model.
Connection Panel
(depending on the model)
ΠConnecting an Aerial or Cable Television Network
´ Connecting Component Devices (DTV/DVD)
- Connect component video cables to component connector (“P
R”, “PB”, “Y”) on the rear of your set and the other ends
to corresponding component video out connectors on the DTV or DVD.
- This PDP displays the optimum picture in 720p mode.
ˇ Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out
connectors on the A/V device.
¨ Connecting Computer
- Connect the D-Sub cable to “PC (PC IN)” on the rear of your set and the other end to the Video card of your
computer.
ˆ Connecting Set-Top Box, VCR or DVD
- Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.
Ø Connecting DVI
- Connect the DVI AUDIO (L, R) input jacks on the TV with the AUDIO output jacks on the Set-Top Box or DVD using
an audio cable.
- The DVI IN jack is not compatible with PC.
- This PDP displays the optimum picture in 720p mode.
∏ POWER IN
- Connect the supplied power cord.
☛
Whenever you connect an audio or video system to your set, ensure that all elements are switched off.
☛
When connecting an external device, match the colour of the connection terminal to the cable.
Rear Panel
´
∏
ˇ¨
ˆØ
Cable Television
Network
or
or
Œ
BN68-00955A-00Eng_0819 8/19/05 2:05 PM Page 5
