32
The Motion Timer fl ows are as followings. (Movie Clip mode excluded)
Selecting the Motion Timer
Pressing the Shutter button
Confi rming the composition (Within 6 sec.)
*1
Starting the
detection (Swing your hands fully)
*2
Stopping the detection
(Do not move)
Taking an image (after 2 sec.)
*1: The camera detects the subject's movement 6 seconds after pressing the
Shtter button, so confi rm the composition within 6 seconds.
*2: Move your body or hands fully.
In the following cases, the Motion Timer may not operate.
The focus distance is over 3m.
The exposure is too bright or dark
In backlight conditions.
The movement is insignifi cant
The movement is detected beyond
the center part (50%) of the sensor
where the movement is recognized.
If the camera doesn`t sense any
movement for 30 seconds, or the
camera doesn’t sense stillness
after sensing movement
Motion Timer
Motion Icon & Self-timer lamp
Pressing the Shuter button after
setting the Motion Timer
Blink (1 second interval)
Detecting the subject's movement Blink (0.25 second interval)
No movement is detected
Turn on and the image is taken
after 2 seconds
MENU / OK button
MENU button
- When you press the MENU button, a menu related to each
camera mode will be displayed on the LCD monitor. Pressing it
again will return the LCD to the initial display.
- A menu option can be displayed when the following are selected :
MOVIE CLIP and STILL IMAGE mode. There is no menu
available when the voice recording function is selected.
OK button
- When the menu is displayed on the LCD monitor, this button is
used for shifting the cursor to the sub menu or for confi rming data.
Self-timer
(
)
/ Right button
The detection range of
Motion Timer
[Menu off]
[Menu on]
[Pressing the MENU button]
RECORDING
Center AFFocus Area
Exit
MENU
Move
OffVoice Memo
Voice Record
