31
Wide
Sets the picture to 16:9 wide mode.
Panorama
Use this mode for the wide aspect ratio of a
panoramic picture.
Zoom1
Magnify the size of the picture vertically on
screen.
Zoom2
Magnify the size of the picture more than
Zoom1.
Stretch
Moves the Zoom2 picture up a little to fully
show the bottom. Use this picture size if you
want to view Zoom2 picture along with cap-
tions when watching movies.
4:3
Sets the picture to 4:3 normal mode. This is a
standard PDP screen size.
Changing the Screen Size
(When entering the Video mode)
Notes
• In VIDEO, S-VIDEO, Component1 mode, all screen modes can be selected.
(Wide ➝ Panorama ➝ Zoom1 ➝ Zoom2 ➝ Stretch ➝ 4:3).
• In RGB mode, only Wide & 4:3 modes can be selected.
When you press the Aspect button on the remote control, the PDP’s screen mode should appear in
sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, Stretch, 4:3.
Note
• If you watch a still image or the 4:3 mode for a long time, image may be burned onto the screen,
view the monitor in wide mode or panorama mode as possible.
30
Changing the Location of the PIP Image
1
Press the Menu button. Move the joystick up or
down to select the “PIP”, then press the joystick to
enter.
2
Move the joystick up or down to select the “Locate”.
3
Move the joystick to move the PIP screen where you
want.
4
Press the Menu button to exit.
