12 – High Resolution Compact ATM Camera
Introduction
13
Introduction
PART NAMES AND FUNCTIONS
Front❖
Lens 3.7mm (F2.0)
Bracket Used to fi x the product on a wall or ceiling.
Video Out Outputs camera’s video signal, which is to be connected to a monitor’s Video In. The port can be
used for menu control if connected with a controller.
Power In Power cable is connected to this terminal.
L/L PULSE Clock port for LINE-LOCK control.
GND Grounding port.
ALM.OUT Alarm out port for camera’s alarm signal output.
n
o
p
q
r
s
t
ALM.O
UR
L-P
ULSE
GND
o
n
p
q
r
s
t
Port for camera’s fi rmware update. For further details, refer to the below table:
NO Port Name Description
1 EXT-IN Input port for random trigger.
2 KEY-E Input port for multiplexed analog voltage key.
3 GND Grounding port for the board.
4 DSPSTB Selection port for JTAG upgrade chip.
5 DSPSDI Output port for JTAG upgrade data.
6 DSPSDO Output port for JTAG upgrade data.
7 DSPSCK Clock port for JTAG upgrade clock.
8 FSPE Selection port for JTAG upgrade mode.
Sample KET-E port’s external connection is
shown in the right.
n
Rear❖
1. EXT-IN
2. KEY_E
3. GND
4. DSPSTB
5. DSPSDI
6. DSPSDO
7. DSPSCK
8. FSPE
1. L/L PULSE
2. Alarm_out
3. GND
4. Video out
5. GND
6. V+12V
1.
-
.
_
3.
ND
4. DSPST
5. DSPSDI
6. D
P
D
7. D
P
K
8. FSPE
1. EXT-IN
2. KEY_E
3. GND
4. DSPSTB
5. DSPSDI
6. DSPSDO
7. DSPSCK
8. FSPE
