✤ The Audio Dubbing function works only in Player Mode.
✤ You can not dub sound on a pre-recorded tape in LP or 16 bit mode.
✤ You can add sound to the original sound on a pre-recorded tape
recorded in SP mode with 12bit sound.
✤ Use the internal or an external microphone(not supplied) or other
audio equipment.
✤ The original sound will not be erased.
1. Set the Power switch to PLAYER.
■ If you want to use an external
microphone, connect the microphone
to the external MIC input jack on the
Camcorder.
2. Set the Mode switch to TAPE.
3. Press the (PLAY/STILL) button and
find the timeframe of the scene to be
dubbed.
4. Press the (PLAY/STILL) button to
pause the scene.
5. Press the A.DUB button on the remote
control.
■ Audio Dubbing icon ( ) will be
displayed on the LCD screen.
■ The Camcorder is ready for dubbing.
6. Press the (PLAY/STILL) button to
start dubbing.
■ Press the (STOP) button to stop the dubbing.
[ Notes ]
■ You can not use the Audio Dubbing function while playing a write
protected video tape.
■ To utilize an external MIC or sound source, connect a microphone
to the MIC jack or use the AV cable to connect external sound
source input.
■ To dub an external sound source, set the AV In/Out function to In
(SC-D355 only). (see page 76).
ENGLISH
Playback
7777
Dubbing Sound
Audio Dubbing (SC-D354/D355 only)
✤
Player
Audio dubbing ( )
✤
LP 16
✤ , 12 SP
( )
✤ ( )
✤
1. PLAYER( )
■ ,
2. Mode TAPE( )
3.
(PLAY/STILL( / )) ,
4. (PLAY/STILL( / ))
5. A.DUB( )
■ A.DUB( )
■
6. (PLAY/STILL(
/ ))
■ (STOP(
)) ,
■ ,
■ External MIC( MIC) ,
Audio/Video( / )
■ , AV In/Out In( )
(
SC-D355
) ( 76 )
Audio dubbing
(
) (
SC-D354/D355
)
