Advanced Features
56
Voice Dialing Activation
Voice Dialing is always active once you have trained the
phone to accept Voice Dialing entries. To place Voice Dialing
calls, press and hold , and then say the name into the
phone after you hear the voice prompt and the beep.
You can also initiate a Voice Dialing call just by opening the
flip, when you select this option through the Main Menu.
To change Voice Dialing setup options:
1. Press to display the Main Menu.
2. Press for Voice Dial.
3. Press for Set Active.
4. Press the scroll keys to toggle between options:
• Talk Only: Enables Voice Dialing by pressing and
holding .
• Talk or Flip: Enables Voice Dialing by pressing and
holding , or by opening the flip
5. When the desired option displays, press to save the
setting.
Placing a Call Using Voice Dialing
To place a call using Voice Dialing:
1. To place the call, press and hold , or open the flip,
depending on the setting.
2. At the voice prompt, say the name into the phone.
• The phone places the call if it recognizes the name.
• If the phone does not recognize the name, the screen
prompts for the name again.
• If the phone is unable to recognize the name after two
attempts, the following message displays: “Cannot
recognize name. Please check name.” The phone
returns to Standby mode automatically, and you can
try the call again later.
