Menu functions
Messages
(Menu 5)
61
-
User name
: enter a name to be displayed as the
sender’s name in your outgoing e-mails.
-
Email address
: enter your e-mail address.
-
Reply address
: enter your e-mil address to be
used when the recipient sends a reply.
-
User ID
: enter your e-mail ID.
-
Password
: enter your e-mail password.
-
SMTP server
: enter the IP address or host name
of the outgoing e-mail server.
-
SMTP port
: enter the SMTP port number.
-
Protocol type
: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
-
POP3 server
/
IMAP4 server
:
enter the IP
address or host name of POP3 or IMAP4 server.
-
POP3 port
/
IMAP4 port
: enter the POP3 or
IMAP4 port number.
-
APOP login
: connect to the server by using the
APOP login scheme when this option is selected.
-
Include attachments
: select this option to
receive attachments with e-mails.
-
Max. Emails retrieved
: set the number of
headers you will retrieve from the server.
-
Secure connection
: use a secure connections
for e-mail service.
•
Email profile
: configure the network settings
required to send or receive e-mails.
Current profile
: select a profile.
Profile settings
: set up an e-mail profile. The
following options are available for each profile:
-
Profile name
: enter a name for the e-mail
profile.
-
APN
: enter the access point name used for the
GPRS network address.
-
Login ID
: enter the user ID.
-
Password
: enter the password.
-
DNS1
: enter the primary address.
-
DNS2
: enter the secondary address.
•
Block list
: specify e-mail addresses or subjects
you want to reject.
