Entering text
48
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the
word you want to add, press the
0
or Down key
to display the alternative words.
2. When you press the
0
or Down key at the last
alternative word, the display shows
Add
on the
bottom line. Press the key or
Add
soft key.
3. If necessary, clear the word using the
C
key and
enter the word you want to add using Alphabet
mode. See page 49.
4. Press the key or
OK
soft key.
The word is added to the T9 dictionary and
becomes the first word for the associated
keypress series.
Note
: This feature may not be available for some
languages.
• To enter periods, hyphens, or apostrophes, press
the
1
key. T9 mode applies grammar rules to
ensure that correct punctuation is used.
Example
: The
1
key is used twice to display two
punctuation marks:
• To shift case in T9 mode, use the key. There
are three cases; Initial capital ( ), Capital lock
( ), and Lower case ( ).
• You can move the cursor by using the Left and
Right keys. To delete letters, press the
C
key.
Press and hold the
C
key to clear the display.
