SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly instructions
6-5
This Document can not be used without Samsung's authorization
5 6
7 8
9 10
1) Insert a rubber into the antenna contact
with care not to damage antenna contact with
a pair of tweezers.
1) Put together the speaker assembly and
screw in the right red circle. Then put the
speaker connector on the connector on the
PBA.
A
...
1) Place the frame on the right position and
lock three hooks in the red circle. Screw the
frame in the red A circle.
1) Solder the receiver on the PCB minding
silk marks of soldering pads on the PCB. Be
careful not to cause a short-circuit when you
solder.
1) Stick the sponge in the guideline oh the
LCD connector with care.
1) Place the key pad properly minding guide
poles on the front cover.
