112
Menu functions
Creating a profile
1. Press <
Options
> and select
New
.
2. Specify profile parameters:
•
Set name
: enter a profile name.
•
Access name
: edit the access point
name used for the address of the
GPRS network gateway.
•
Auth type
: choose the type of
authentication used.
•
User ID
: enter the user ID.
•
Password
: enter the user password.
•
Protocol
: select the protocol from
among
WAP
,
HTTP
, and
Other
.
•
Home URL
: (WAP and HTTP only)
enter the URL address of the page to
be used as your homepage.
•
Gateway address
: (WAP only) enter
the gateway address of the proxy
server.
•
Proxy address
/
Port
: (HTTP only)
set the proxy server address and
port.
•
Secure connection
: (WAP only)
turn the secure mode on or off.
•
Linger time (sec.)
: set a time
period after which the network is
disconnected if there has been no
new data traffic in that time.
•
Advanced settings
:
provide you
with the following options:
Static IP
: specify if you want to
manually enter an IP address; see
the
Local phone IP
option. If you
want the IP address to be
automatically assigned by the server,
remove the check mark.
Local phone IP
: enter the IP
address obtained from the network
operator, if you selected the
Static
IP
option.
Static DNS
: specify if you want to
manually enter the Domain Name
Server (DNS) address; see the
Server 1
/
Server 2
option.
Your phone is set up by default for
connecting to the network. If you change the
settings without first checking with your
service provider, the web browser, MMS, and
e-mail features may not work properly.
