English - 11
Your television can be placed in Standby mode, in order to reduce
the power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1 Press the POWER ( ) button on the remote control to turn the
screen off.
Result
: The STAND BY/TEMP indicator on the front of the
television lights.
2 To turn the screen back on, simply press the POWER ( ) button
again.
➢
You can also switch on by pressing the P /, TV or numeric
button.
☛
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the power
switch toward “
OFF” (O). It is best to unplug the set
from the mains and aerial.
Placing Your Television in Standby Mode
The mains lead is attached to the rear of your television.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2 Press the power switch on the side of the television toward “ON”
(
I).
3 Press the POWER ( ) button on the remote control (or the “”
button on the front of the television).
Result
: The programme that you were watching last is re-
selected automatically.
➢
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
15 or “Storing Channels Manually” on page 16.
4 To switch your television off, press the power switch toward “OFF”
(
O).
Switching Your Television On and Off
TV
TV
BP68-00382A-00Eng 6/10/04 4:26 PM Page 11
