073
Settings ( )
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc. .
- PAL :
Australia, Austria, Belgium, China, Denmark, Finland, Germany,
U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway etc. .
- When using a TV as an external monitor, you will need to select the
external or AV channel of the TV.
- There will be a digital noise on the external monitor, but it is not a
malfunction.
- If the image is not in the center of the screen, use the TV controls
to center it.
- When the camera is connected to an external monitor, some parts
of the image may not be displayed.
- When the camera is connected to an external monitor, the menu
will be visible on the external monitor and the menu functions are
the same as those indicated on the LCD monitor.
Setting the USB
If the camera is set to connect automatically to a PC or a printer using
a USB cable, you can manually set [Computer] or [Printer].
-[USB] sub menus:
[Auto]* : Automatically enables an
external device connected with
a USB cable.
[Computer] : Sets computer connection
mode if the connected external
device cannot be recognized
automatically.
[Printer] : Sets printer connection mode if the connected external
device cannot be recognized automatically.
The Video output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device
(monitor or TV, etc.) to which the camera is connected. PAL
mode can support only BDGHI.
Connecting to an external monitor
When the camera is connected to an
external monitor, the image and menus
on the LCD monitor will be visible on the
external monitor.
Selecting Video out type
Back Set
AF Lamp :On
Anynet+ (HDMI-CEC) :On
HDMI Size :1080i
Video Out :NTSC
USB :Auto
Auto Power Off :3 min
Auto
Computer
Printer
Yellow - Video
White - Sound
Back Set
AF Lamp :On
Anynet+ (HDMI-CEC) :On
HDMI Size :1080i
Video Out :NTSC
USB :Auto
Auto Power Off :3 min
NTSC
PAL
