30
Changing the Digital Output (2)
Use the up/down cursor buttons ( , ) to select the audio
output (LPCM/Bitstream) and press the enter button ( ).
The setup screen reappears (with the “Digital Output” setting changed to the
selected audio output).
3
Caution
Improper settings may cause noise harmful to the ears or damaging to speakers.
Read the instructions for the digital audio device connected.
Monitors include two types: normal monitors with a 4:3 horizontal-to-
vertical screen ratio, and wide monitors with a 16:9 ratio. Some DVDs
also store multiple aspect ratios such as one or more of the 3 described
below. Set an aspect ratio that works with the monitor you are using.
Changing the Aspect Ratio (Vertical/Horizontal Screen Image Ratio) (1)
4 : 3 Letter Box
4 : 3 Pan & Scan
16 : 9 Widescreen
Select this option when you are using a normal monitor.
Any 16:9 wide image DVDs played will be vertically
compressed (leaving black bands at the top and bottom of
the screen).
Select this option when you are using a normal monitor.
Any 16:9 wide image DVDs played will be cropped at the
left and right.
Select this option when you are using a wide monitor. Any
16:9 wide image DVDs played will be displayed at full size.
* To display images at full size, set your monitor to “Full” or
the corresponding mode. For details, refer to your monitor
manual.
Use the up/down cursor buttons ( , ) to select “ ”
and press the enter button ( ).
The display setup screen is displayed.
Display
2
