29
PC ADJUSTMENT
PC MODE ADJUSTMENT
"PC mode adjustment" menu is provided to adjust "Auto setup", "Clock", "Phase", "Position", "Power save" and "Information"
to conform to your computer. These function can be operated as follows.
Auto setup
COMPUTER MODE
Press MENU button and ON-SCREEN MENU will appear.
1
Press button to select "PC mode adjustment" menu and
then press OK button. "PC mode adjustment" menu will appear.
2
Press button to select the item that you want to adjust, and
then press OK button. The selected item will appear.
3
"Auto setup" function is provided to automatically adjust "Clock",
"Phase" and "Position" to conform to your computer.
"Auto setup" started by pressing the button, and the message
"Now adjusting" will be displayed.
Display returns to previous menu when adjustment is completed.
NOTE :
● In the following cases, the Plasma Monitor may not adjust itself
with the "Auto setup" function.
1) If the picture is not displayed fully on the screen.
2) When a contrast pictures, such as an outdoor scene, is displayed
on the screen.
● It depends on signal and computer's configuration, "Auto setup"
function cannot be operated properly. In this case, adjust "Clock",
"Phase" and "Position" manually.
Adjust each level by pressing button.
4
Clock
Adjust when Vertical noise lines are observed.
(Horizontal width will be changed by adjustment.)
Adjust with buttons.
Phase
Adjust when Horizontal noise lines are observed.
Adjust with buttons.
Position
Adjusts the screen position.
Adjust with buttons.
"PC mode adjustment" MENU
