INSTALLATION
Installation site
To
operate this unit
property
and
to
obtain
maximum performance, install the unit in a location with
the
following conditions:
1.
A location
not
subjected to direct sunlight
Installation
in
a location subjected to direct sunlight might lead to inadequate cooling.
2.
A location
with
adequate ventilation
Always keep in front of air intake
and
exhaust area
open
for free air circulation. Poor ventilation will result
in
inadequate cooling.
3.
A location away from heat generating sources
Avoid
installing the unit near heat-emitting appliances such as gas ranges or stoves. Heat
can
reduce
refrigeration efficiency.
4.
A location
with
a sturdy and level floor
Install the unit
on
a sturdy floor to avoid vibration
and
noise. Placing the unit
on
an
unsteady floor may
cause vibration
and
noise.
Lh.
WARNING
Be
sure
to
install the unit on a
sturdy
floor. If the floor is not strong enough or the installation site
is
not
adequate, this may
result
in
injury from the unit falling or tipping over.
Lh.
CAUTION
Select a level and sturdy
floor
for
installation. This precaution will prevent the unit from tipping.
Improper installation may result
in
water spillage or injury from the unit tipping over.
5.
A location
not
prone to high humidity
Lh
WARNING
Do
not
use the
unit
outdoors. Current leakage or electric shock may result if the unit is exposed
to
rain
water.
,~ever
install the unit in a humid place
or
a place where
it
is
likely
to
be
splashed
by
water.
Deterioration of the insulation may
result which could cause current leakage or electric shock.
Do
not
install the
unit
under water pipes
or
steam pipes. Deterioration of the insulation may result which
could cause current leakage or electric
shock.
6.
A location
without
a flammable
or
corrosive gas
Avoid
placing the unit
where
chemicals
are
stored or gases are produced. Also avoid areas where there
is
a
great
deal of dust.
6.
12
English
