English
52
Settings/
Adjustments
Hiding Partial Image (Privacy Protection)
■ To lock (protect) the settings:
1
11
1
Select “PASSWORD LOCK” – “OFF” and press
the SET button.
RThe “PASSWORD” screen appears.
2
22
2
Enter the password (4 numerical values) and
press the SET button.
• Enter “1234”.
RIf you enter a valid password, you will see the “OK” message
and the “BACK” blinks.
3
33
3
Press the SET button.
RReturns to the “PRIVACY MASK SETTING” screen, and “ON”
will blink next to “PASSWORD LOCK”.
MEMO: • You must enter the valid password before you can lock
the settings using a password.
•“1234” is a factory-preset password; you are
recommended to change it to your own password.
(See page 53)
SET
PRIVACY MASK SETTING
PASSWORD CHANGE SET
MENU BACK
MASK SET SET
PASSWORD LOCK OFF
Note: If you enter an incorrect password, you will see the “NG”
message. If you fail to enter the valid password three
times successively, the prompt display will disappear and
“BACK” will blink. Press the SET button to return to the
“PRIVACY MASK SETTING” screen.
MEMO: To disable the password lock, select “ON” and press the
SET button, and then enter the password.
SET
PASSWORD
1234
MENU BACK
Move
cursor.
Select
number.
SET
