PARTS NAMES
REAR PANEL
1 CAMERA input terminals (1 – 8)
2 VCR IN (Video cassette recorder input) terminal
3 VCR OUT QUAD FULL (Video signal output) terminal
Output in quad screen and full screen display modes.
4 VCR OUT QUAD ONLY (Video signal output) terminal
Output only in quad screen display mode.
However, the output display mode at this terminal can be
switched from quad screen mode only to quad screen and
full screen display modes (see (MONITOR SET) on page
22, and Tables 1 and 2 on pages 23 and 24).
5 RS232C (RS-232C) terminal
To control this unit using a personal computer, connect the
computer serial terminal to this terminal using a 9-pin
D-SUB cable (sold separately).
6 CONTROL terminal
7 Battery compartment
8 Power cord holder
Using the supplied tie, attach the power cord to the holder
as illustrated.
9 AC Power socket
Insert the power cord female plug firmly into this socket.
When the other plug of the power cord is connect to a live
power source, the POWER indicator on the front panel will
light.
(RS232C terminal)
Pin No. Signal Function Signal direction
1 –– –
2 RXD Data reception Computer →This unit
3 TXD Data transmission This unit → Computer
4 DTR Normally “H”
5 GND Common –
6 –– –
7 –– –
8 CTS No reception This unit → Computer
9 –– –
(CONTROL terminal)
Pin Signal
RC Remote input
C Common
SW Switching input (DC 5V)
C Common
AL Alarm input (DC 5V)
C Common
1 Alarm input 1
2 Alarm input 2
3 Alarm input 3
4 Alarm input 4
5 Alarm input 5
5 Alarm input 6
7 Alarm input 7
8 Alarm input 8
15263748
VIDEO OUT
RS232C
CONTROL
RC
C
SW
C
AL
C12345678
CAMERA
IN
VCR
QUAD
FULL
QUAD
ONLY
156
89
23 4
7
9876
54321
L8QR5/XE (VQC-801P, VQM-801P GB) 1999. 12. 2
4 English
