[Table of Contents] [Previous Page] [Next Page]
16. TROUBLESHOOTING
In case a problem occurs, first check wiring connector connections.
PROBLEMS CAUSE COUNTERMEASURES
When the main power is
not on, the machine is not
activated.
The
ower is not ON. Firml
insert the
lu
into the outlet.
Incorrect power source/voltage.
Make sure that the power supply/voltage
are correct.
AC Unit fuse blown off due to
instantaneous overcurrent.
First remove the cause of overcurrent,
then re
lace the fuse
see Sec. 6
.
514-5036-15000
FUSE 6.4 ØX 30
15000mA 125V
AC100~120V
AREA
514-5037-8000
FUSE 6.4 ØX 30
8000rnA 250V
AC220~240V
AREA
PTV screen is blackened
and the fluorescent lamp
does not light up.
Power supply unit fuse blown
off due to instantaneous
overcurrent.
First remove the cause of overcurrent,
then re
lace the fuse.
514-5036-10000
FUSE 6.4 ØX 30 10000mA 125V
PTV screen is all blue.
Defective connections in
etween each board.
Make sure of correct connections in
etween each board.
The color of image on
PTV screen is incorrect.
Connector connections are
defective.
Check to see if connector connections of
RGB and SYNC are correct.
Incorrect monitor adjustment.
Make appropriate adjustments (see Sec.
13
.
PTV screen has a color
deviation.
Affected by the periphery, such
as other machines, location
building's steel frames, etc.
Make convergence adjustments (see Sec.
13
.
Change installation direction/position.
Move the other machines which cause the
roblem.
Sound is not emitted. Sound volume adjustment is not
correct.
Adjust the SWITCH UNIT's sound
ad
ustment volume
control
see Sec. 8
.
Malfunctioning of sound BD
and memor
.
Perform SOUND TEST (see Sec. 8).
Control panel and pedal
not operable satisfactorily.
V. R. position deviated, or V. R
malfunctionin
.
Adjust or replace the V. R. (see Sec. 9 &
10
.
ADJUST GEAR's engagement is
not correct.
Adjust the engagement of ADJUST
GEAR
see Sec. 9 & 10
.
SHIFT LEVER doesn't
operate satisfactorily.
Switch position deviated, or
switch malfunctioning.
Adjust or replace the
Switch (see Sec. 11).
509-5566
SW MICRO
TYPE
Steering Wheel reaction
First turn the
ower off and then turn it
Pa
e 1 of 2Troubleshootin
7/12/2005htt
://www.sauservice.com/manuals/Da
tona%20Folder/DDhtml/DD45.html
