6
English
PREPARATIONS
Rear View
1. DC IN
Connect to the power supply.
2. LINE IN
Connect to an analog audio output on the TV or an analog device.
3. COAXIAL IN
Connect to a coaxial audio output on the TV or a digital device.
Model: SB201C
Input Power: 15V 2.4A 36W
MADE IN CHINA
This device complies with part 15 of the FCC rules. Operation is
subject to the following t wo conditions: (1) t his device may not
cause harmful interference, and (2) this device must accept any
interference received including i nterference that may c ause
undesired operation.
Model: SB201C
Input Power: 15V 2.4A 36W
MADE IN CHINA
This device complies with part 15 of the FCC rules. Operation is
subject to the f ollowing two c onditions: (1) this device may not
cause harmful i nterference, and (2) t his device must a ccept any
interference received including interference that may cause
undesired operation.
21 3
Wall Mounting
• Placethewallmountbracketonawallthatthestrengthissufcientsurfaceandthensecure
it with appropriate screws.
• Fit the SoundBar into the corresponding slots of the wall mount bracket. For secure
installation, make sure the mounting studs slide down to the right into the bottom of the
slots.
Model: SB201C
Input Power: 15V 2.4A 36W
MADE IN CHINA
This device complies with part 15 of the FCC rules. Operation is
subject to the following t wo conditions: (1) t his device may not
cause harmful interference, and (2) this device must accept any
interference received including i nterference that may c ause
undesired operation.
Model: SB201C
Input Power: 15V 2.4A 36W
MADE IN CHINA
This device complies with part 15 of the FCC rules. Operation is
subject to the following t wo conditions: (1) t his device may not
cause harmful interference, and (2) this device must accept any
interference received including i nterference that may c ause
undesired operation.
Warning: You might need to nd other appropriate screws based on your own wall materials.
SEIKI_Soundbar UG-English Original_v2.indd 6 2012/8/3 18:58:26
