Scale
marking
Standby
position
0 1 2 3 4 5 6 7 8 9 10 11
Indication on
dial
0 D
(Day)
Power
reserve
amount
The watch
stops
operating.
0 3 H 6 H 9 H 12 H 15 H 18 H 21 H 1 D 2 D 3 D 4 D
Amount of
generated
power
0 20
Min.
40
Min.
1 H 1 H
20
Min.
1 H
40
Min.
2 H 2 H
20
Min.
2 H
40
Min.
3 H 3 H
20
Min.
3 H
40
Min.
H : Hour
D : Day
W : Week
* The minimum amount
of power reserve and
generated power is
described in the table.
✽
The power reserve indicator provides an approximate time that the watch keeps operating
without needing to be charged.
✽
If the direct drive indicator hand moves to the 0 position, the watch will stop operating within
3 hours. When the watch stops, the indicator hand moves to the standby position to show
that the watch stops operating due to a power shortage.
✽
If the crown is turned after the watch is fully charged, the indicator points at the “M+1” position.
■
POWER RESERVE INDICATOR
●
The watch checks power reserved in the rechargeable battery and displays
how long the watch will keep operating in 18 steps (0 - M scale marking).
●
The continuous operating time until approximately one month (30 days)
can be displayed.
■
REAL-TIME POWER INDICATOR
●
While turning the crown to charge the watch, the watch checks a newly
generated amount of power and displays it in 19 steps (0 - “M+1” scale
marking).
●
A maximum 6 hours of generated power can be displayed.
✽
The real-time power indicator provides an approximate amount of power generated through
current power generation.
✽
After power generation by turning the crown is completed, the indicator hand will display the
amount of newly generated power for approximately 4 seconds, and then the indicator hand
will move to display the total amount of power reserve.
Scale
marking
12 13 14 15 16 17 18
Indication on
dial
W
(Week)
M
(Month)
Power
reserve
amount
5 D 6 D 1 W 2 W 3 W 30 D
Amount of
generated
power
4 H 4 H
20
Min.
4 H
40
Min.
5 H 5 H
20
Min.
5 H
40
Min.
6 H
■
SCALE TABLE OF POWER RESERVE AMOUNT AND GENERATED
POWER AMOUNT
