14
1 Press the button.
2 If “5-” is indicated and the picture
does not change, press the
-/--
button to switch over to the 1-digit
select mode and press
again.
BASIC OPERATION (Continued)
Changing the Channels
Changing channels using CHANNEL SELECT on the remote control.
To select a one-digit channel
(e.g., Channel 5):
• To handle the increasing number of channels available, this LCD TV set allows you to select up to
100 positions (Channels 0 to 99). One-digit and two-digit methods of selection can be used. Follow
the procedure shown below to select channels.
1 Press the
-/--
button to set the
2-digit select mode.
2 Press the button.
3 Press the button.
Note:
• Complete this procedure within 4
seconds, otherwise the selection will
not be made.
• Press A (Flashback) to show the
previous channel.
To select a two-digit channel
(e.g., Channel 15):
Changing channels with CH ( )/( ) on the remote control.
Press CH ( ) and the channels change in the order shown below:
1 → 2 → 3 → . . . → 98 → 99 → 0 → 1 → 2 → 3 → . . .
Press CH (
) and the channels change in the order shown below:
3 → 2 → 1 → 0 → 99 → 98 → . . . → 3 → 2 → 1 → . . .
B/G
B/G
CH
MENU
E
TV/VIDEO
REVEAL
HOLD
END
M
MENUSOUND
SUBTITLE
SUBPAGE
TEXT
ROTATE
WIDE
T
CHVOL
MENU
SLEEP DIS.MODE
OKMPX
SUBTITLE END
HOLD
SUBPAGE
REVEAL
TEXTBRIGHT
TV/VIDEOPOWER
CHANNEL
SELECT
A (Flash-
back)
CH ( )/
( )
