11
ENGLISH
• Be sure the erase-protection tabs on the tape are in
place.
• The type of tape(normal or chrome) is automatically
detected.
• The metal tapes are not recorded correctly.
• ”B” lights up.
Load a tape to be recorded.
1
RECORDING
When recording with Dolby B NR
system, select the Dolby B NR mode.
2
Select the reverse mode.
3
• According to the selected reverse mode, recording
will be performed as follows:
• When selecting the recording of both sides and
recording first on the back side, recording is made
only on that side.
• Be sure the both of erase-protection tabs on the tape
are in place when recording on the both sides.
: Recording of a single side.
, : Recording of both sides.
Select the program source to be recorded.
Example) When selecting the tuner.
4
Press the RECORD/RECORD MUTE
button to enter the recording pause mode.
5
• “ ” lights up and this unit enters the recording
pause mode.
• In the recording pause mode, when this button is
pressed, the unit will make a 4 second blank space
and then enter the recording pause mode.
Note
• When there is a erase-protection tab, to record on a
single side, you should load a tape correctly or select
the corresponding tape direction depending on the
tape direction display(
: Playback/recording of the
back side,
:Playback/recoding of the front side).
• For your reference, when loading a tape, the side
facing up is the front side and the erase-protection
tabs of the corresponding sides are as follows:
