ENGLISH
57
• To turn on the component connected to DC TRIGGER OUT 2 jack when the desired input source is selected,
you should link DC TRIGGER 2 with the desired input source.
Press the CURSOR UP( )/DOWN( ) buttons to select the DC TRIGGER 2, then press the ENTER
button.
1
When selecting the DC TRIGGER 2 SETUP
• Each time these buttons are pressed, the DC
TRIGGER 2 mode changes as follows:
On : Select this to activate the DC trigger function.
Off : Select this to cancel the DC trigger function.
Press the CURSOR LEFT( )/RIGHT( ) buttons to select the DC TRIGGER 2 mode as desired.
2
• When performing recording with the video
recording component connected to VIDEO 2
(/ROOM 2) IN/OUT jacks, you should set the
VIDEO 2 OUT to On and deactivate the ROOM 2
function.
Note: When the ROOM 2 function is activated,
ROOM 2 source playback will be
performed regardless of the VIDEO 2 OUT
setting.
Press the CURSOR UP(
)/DOWN( )
buttons to select the VIDEO 2 OUT.
1
When selecting the VIDEO 2 OUT
• Each time these buttons are pressed, the mode
changes as follows:
On : Select this to output the signals of the selected
source as a recording (main room) source from
the VIDEO 2/ROOM 2 OUTs.
Off : Select this not to output the signals.
Press the CURSOR LEFT( )/RIGHT( )
buttons to select the desired mode.
2
