ENGLISH
21
RECORDING
Start recording on the TAPE MONITOR.
2
Select the desired input as a recording
source except for TAPE MONITOR.
1
Recording with TAPE MONITOR
Select VIDEO 2 or VIDEO 3 as a recording
source.
1
Dubbing from video components onto
VIDEO 1
Select VIDEO 2 as a video recording source.
1
Dubbing the audio and video signals
separately onto VIDEO 1
Start play on the desired input.
3
Select CD as an audio recording source.
2
Be sure that “TAPE M” goes off.
For tape monitor function, refer to “TAPE
MONITOR function” on page 10.
Start recording on the VIDEO 1.
2
Start play on the VIDEO 2 or the VIDEO 3.
3
The audio and video signals from the VIDEO 2 or the
VIDEO 3 will be dubbed onto the VIDEO 1 and you
can enjoy them on the TV set and from the speakers.
Example) When dubbing the VIDEO 2 video signal
and the CD audio signal separately onto
VIDEO 1.
The analog signals from the 6 CH DIRECT inputs as well as the digital signals from the coaxial or optical digital
input can be heard but cannot be recorded.
The volume and tone (bass, treble) settings have no effect on the recording signals.
