15
Shown on the display:
• Press (D) or (E) to select rapid programming (see “Rapid
programming”).
• Press (B) to exit rapid programming and choose standard
programming (see “Standard programming”).
5.3 Rapid programming
• Press on/off button (A) to switch machine on.
• Press (D) in repetition to display the type of dirt on dishes, on the
top line of the display (G).
• Press button (E) in repetition to select one of the possible
washing modes, on the bottom line of the display.
The most suitable washing programme for the settings made will
be selected. To start this programme, simply close the door (buzzer
sounds, if enabled).
This will sound again at
the end of the programme
if enable.
5.4 Re-using last programme used
• Press on/off button (A) to switch machine on.
When the initial system message for programme setting appears
in the display window select “No” (button B) to disable rapid
programming and the system will offer the last programme
performed.
To start this programme, simply close the door (buzzer sounds, if
enabled).
This will sound again at the end of the programme if enabled.
EN
Instructions for the User
