User instructions
32
3.2 Washing programs
Before starting a washing program make sure that:
•
The water supply tap is
open.
•
The
correct amount of detergent
has been added to the
dispenser
.
•
The baskets have been
correctly loaded.
•
The spray arms are able to
rotate freely
and without obstruction.
•
The dishwasher door is
securely closed
.
HALF LOAD WASH SETTING (certain models only)
This function is especially suitable for loads up to
6 place settings
and allows saving of water and
electricity. It is controlled by the
HALF LOAD
button
(6)
and allows washing in the upper basket
only.
IMPORTANT:
at the end of the program remember
to deactivate the function
to ensure the next
wash is not also carried out in half load mode
by mistake
.
A cutlery basket can be placed in the
upper basket
, while the
lower basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of
water will only reach the upper basket.
CANCELLING THE CURRENT PROGRAM
•
To cancel the currently selected program, open the door and hold down the
PROGRAM
SELECTION (3)
button for a few seconds until the
indicator lights
for programs
4
and
5
illuminate simultaneously.
•
Close the door.
•
After approximately 1 minute the dishwasher will advance to the end of cycle.
CHANGING THE PROGRAM
To change the program in progress, simply open the door and select a new program.
When the door is closed the dishwasher will automatically select the new program.
