Recording
30
To turn the power off
Slide the POWER switch up to the (CHG) OFF
position.
To record still images continuously –
Burst
Select the (MEMORY SET) menu,
[STILL SET], then [ BURST] (p. 63).
You can record 4 to 13 images continuously in
a time interval of about 0.5 seconds.
Indicators displayed during recording
A Recording folder
B Image size
(1152 × 864) or (640 × 480)
C Quality
([FINE]) or ([STANDARD])
D Personal Menu button (p. 54)
E Review button (p. 29)
z Tip
• When you press PHOTO on your Remote
Commander, the image displayed on the screen at
that timing is recorded.
• The recording time, date, and the camera settings
data are recorded automatically on the recording
media without being displayed on the screen. You
can view this information during playback by
selecting [DATA CODE] on the screen (p. 50).
• The recording angle is wider than that of the
CAMERA-TAPE mode.
Selecting image quality or size
Select the (MEMORY SET) menu,
[STILL SET], then [ QUALITY] or
[ IMAGE SIZE] (p. 64).
The number of pictures you can record on a
“Memory Stick Duo” varies depending on
the quality/size of the image and the
recording environment.
Refer to the following list for the approximate
number of pictures that can be recorded on a
“Memory Stick Duo” formatted on your
camcorder.
When the image quality is [FINE]
(number of images)
The image size of 1152 × 864 is 500kB, that of
640 × 480 is 150kB.
P-MENU
60min
FINE
1152
101
1152 × 864 640 × 480
8MB (supplied) 15 50
16MB 30 96
32MB 61 190
64MB 120 390
128MB 245 780
256MB
(MSX-M256)
445 1400
512MB
(MSX-M512)
900 2850
