_STANDARD SETme_/go_ti_ue_}
6O
You can display tile frame attd check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISPLAY/
BATT INFO to tnake the frame disappear.
"_°Tips
• Placingthe subjectat tilecross point olthe
guideflame makes a balancedcomposilion.
When you set [(-?ENTER MARKR] to
[ON], the marker is displayed at the center
of the screen so you can identil3, the center
of the screen easily. The marker is not
recorded. Press DISPLAY/BATT INFO to
tnake the marker disappear.
You can display the color bar or record it on
the tape by setting [COLOR BAR] to [ON].
It is convenient to acljust the color on the
tnonitor connected.
During playback, displays the itfformation
/data code) recorded automatically at the
tithe of recording.
_OFF
Data code is not displayed.
DATE/TIME
Displays the date and time.
CAMERA DATA (below)
Displays cmncra setting data.
[] SteadyShot off
[_Exposurc
[] White balance
[_Gain
[] Shutter speed
[] Aperture vahle
Notes
• Tile exposure a_/justnlent _alue (0EV), ashutter
speed, and lhe aperture value appeal wllen still
images on a 'Memory Stick Duo" arc played
back.
• ._ al?pears lor a picture recorded using a flash.
• In tile DATE/TIME dala display, lhe date and
time arc displayed in tile same area. If you
record a picture withoul setling tile dock, [.....
.... Iand [--:--:--I will appeal.
• During Easy Handycam operalion, you can sel
only [DATE/TIMEI.
AUTO
Displays the remaining tape indicator for
about 8 seconds in situations such as those
described below.
• When you sel the POWER switch to PLAY/
EDIT or CAMERA-TAPE wilh a cassette
inserted.
• When you toucll [_ !Play/Pause).
0R
Always displays the remaining tape
indicator.
The default selling is [ON], allowing yotl to
use the supplied Remole Commander
(p. 106).
"_° Tips
• Set to [OFF] to prevent your camcorder hom
responding to a COlllll/alld sent by rel/lOle
control Ilnils of other calncorders or VCRs.
