22
General Setup
Treble Adjusts high-frequency audio output.
Bass Adjusts low-frequency audio output.
Back Returns to the previous menu.
Set password
The name of this setting
item changes to “Cancel
password” after your
password is entered.
A password can be set to restrict use of the system. Once a
password is specified, it must be entered each time the system is
turned on.
To cancel password protection, select “Cancel password” and
enter the password.
• The system automatically turns off in the following situations. Either
turn the system on and enter the password again or cancel password
protection.
– When the password is entered incorrectly, and you close the
displayed setting menu by using the MENU or b button
– After 90 seconds of inactivity on the password input screen
HDMI pass-through On: Activates pass-through, enabling you to watch or listen to
content on a TV or other display device when the system
is in standby mode. For details, refer to the “Startup
Guide.”
Off
: Deactivates this function. To save power, select “Off”
when a TV or other display device is not connected to the
processor unit.
Control for HDMI On
: Activates control for HDMI CEC (Consumer Electronic
Control)-compatible equipment connected to the
processor unit using the v/V/b/B buttons on the head
mounted unit.
v button: Starts playback.
V button: Pauses playback.
b button: Jumps to the previous chapter. Hold the
button down for fast-rewind.
B button: Jumps to the next chapter. Hold the button
down for fast-forward.
Off: Deactivates this function. Use the remote control of the
connected equipment to control it.
• If control is not possible with this setting activated, the connected
equipment is not compatible with the system’s “Control for HDMI”
function. Control connected equipment directly.
Note
Note
