47
For environment protection, remove
the built-in lithium-ion battery from
the system.
Before removing the battery, drain the
battery by removing the AC adaptor
and using the system only with the
battery.
Removing the Battery Case
1 Remove the four screws, then
remove the bottom panel from the
battery unit.
2 Remove the three screws and the
front panel, then disconnect the
connector.
• Be careful not to damage the cord
cover with metallic tweezers, etc.
when you disconnect the connector.
3 Remove the six screws and the
battery case.
Drop off the remove battery case with
the battery attached for recycling.
• Do not remove the battery from the
battery case.
When Disposing of the
System
•Take out the lithium-ion battery
for recycling.
Do not open the cabinet other
than when disposing of the
system.
•Be careful not to touch the end of
a screwdriver to the lithium-ion
battery when removing the
battery case. If the battery is
damaged, there is risk of leakage,
heat generation, fire, or explosion.
Screw
Bottom panel
Rubber foot
Note
Note
