You can set time intervals to automatically switch to power save mode. To return to shooting
mode, perform an operation such as pressing the shutter button halfway down.
1. MENU → (Setup) → [Pwr Save Start Time] → desired setting.
Menu item details
30 Min/5 Min/2 Min/1 Min (default setting)/10 Sec
Note
Turn off the product when you do not use it for a long time.
The power save function is not activated during playing back slideshow or recording
movies, or when connected to a computer.
[195] How to Use
Changing settings Setup menu
PAL/NTSC Selector
Plays back movies recorded with the product on a PAL/NTSC system TV.
1. MENU → (Setup) → [PAL/NTSC Selector] → [Enter]
Note
This function is provided with 1080 50i-compatible devices only. It is not provided with
1080 60i-compatible devices. The 1080 50i-compatible devices have a “50i” mark on the
bottom of the product.
If you insert a memory card that has previously been formatted with the PAL system, a
message telling you that you must re-format the card appears. When you record using the
NTSC system, re-format the memory card or use another memory card.
When the NTSC mode is selected, the “Running on NTSC.” message always appears on
the start-up screen each time you turn the product on.
[196] How to Use
Changing settings Setup menu
Cleaning Mode
