1
Press MENU.
2
Press V or v to select t, and press
.
3
Press V or v to select DAYLIGHT SAVING,
and press
.
4
Press V or v to select YES or NO, and press
.
Setting daylight
saving time
(DAYLIGHT
SAVING)
Choose To
YES Set for daylight saving start.
NO Set for daylight saving end.
5
Press MENU to return to the original screen.
If your area uses daylight saving time, change
DAYLIGHT SAVING setting depending on the season,
before setting the current time.
Daylight saving start
• After the first Sunday in April, set DAYLIGHT
SAVING to YES. Current time setting (right
column) automatically moves one hour ahead.
Daylight saving end
• After the last Sunday in October, set DAYLIGHT
SAVING to NO. Current time setting automatically
moves one hour back.
Setting the clock enables you to turn the projection TV
on and off with the timer. Make sure to set daylight
saving time first.
Setting the clock
(CURRENT TIME SET)
5
Set the current day of the week and time.
(1)Press V or v to set the day of the week, and press
.
(2) Set the hour and minutes in the same way as in
step (1). When you press
after setting the
minutes, the clock starts.
6
Press MENU to return to the original screen.
V
v
MENU
V
v
MENU
To select surround sound or super
woofer mode of the SAVA speaker
system
After setting SPEAKER to SAVA SP, follow the
procedure below.
Press V or v to select SURROUND MODE or
SUPER WOOFER MODE, and press
.
For details on each option, refer to the operating
instructions of the speaker system.
Note
• This feature is only for Sony SAVA speaker system with an
operation capability for KP-41T65C, KP-53S65C, and KP-61S65C.
Setting audio out
(AUDIO OUT)
You can change AUDIO OUT to VARIABLE or FIXED
when SPEAKER is set to OFF.
AUDIO OUT is variable when SPEAKER is set to ON.
1
Press MENU.
2
Press V or v to select
, and press
.
3
Press V or v to select AUDIO OUT, and press
.
4
Press V or v to select VARIABLE or FIXED,
and press
.
VARIABLE: Sound output varied according to the
projection TV settings. You can adjust
the volume, bass, treble, and balance.
FIXED: Sound output is always fixed to a certain
level. The volume, bass, treble, and balance
are also fixed to the factory settings.
5
Press MENU to return to the original screen.
Note
¥ If AUDIO OUT appears in gray, set SPEAKER to OFF.
Choose To
ON Listen to the sound from the
projection TV.
OFF Turn off the projection TV speaker
sound and listen to the projection
TV’s sound solely through the audio
system speakers.
SAVA SP Turn off the projection TV speaker
sound and listen to the projection
TV’s sound through the Sony SAVA
series speaker system. You can adjust
volume, muting, surround modes,
and super woofer mode with the
remote control supplied with the
projection TV.
V
v
MENU
