46
Additional Operations
Tape options (continued)
Setting the color system
Normally set COL SYS in the menu to AUTO. If streaks appear
during playback, set COL SYS to correspond to the system that the
tape was recorded in.
1
Press MENU.
2
Press M or m to select
, then press ENTER.
3
Press M or m to select VIDEO SET UP, then press ENTER.
4
Press M or m to select COL SYS, then press ENTER.
5
Press M or m until the corresponding color system appears,
then press ENTER.
Select the same color
system that the tape was
recorded in.
To return to the normal screen
Press MENU.
47
Additional Operations
Selecting a
bilingual program
You can listen to the sub-channel of
NICAM bilingual I system programs.
Press A/B repeatedly until you receive
the sound mode you want.
The on-screen display changes to show
the selected sound mode and the 1
indicator on the video TV lights up in
red.
Broadcasting On-screen display (Selected sound)
NICAM bilingual I
Notes
• Bilingual broadcasts can be received only in the NICAM bilingual I
television system.
• Only the selected sound can be recorded.
If the sound is distorted or noisy when receiving a monaural
program through the 8 (antenna) terminal
Press A/B repeatedly until “MONO” appears on the screen.
To cancel the monaural sound setting, press A/B again until
“AUTO” appears on the screen.
Note
• The “MONO” or “AUTO” setting is memorized for each program
position.
