Basic Operations
21
)0P
P·p
+
=
p
·
·ª
·ª
√
◊
√
◊
P
p
= +
0 )
VOLUME +/–
DECK A ª ·
DECK B ª ·
1 Press § and insert a recorded tape
in deck A or B.
2 Press DIRECTION repeatedly to
select A to play one side. Select
ß* to play both sides.
To play both decks in succession, select
RELAY (relay play).**
With the side
you want to
play facing
forward
To Do this
Stop play Press p.
Pause Press P PAUSE. Press
again to resume play.
Fast-forward Press 0 or ).
Rewind Press 0 or ).
Remove the cassette Press §.
Adjust the volume Turn VOLUME (or press
VOLUME +/– on the
remote).
* The deck stops automatically after
repeating the sequence five times.
** Relay play always follows the following
sequence:
Deck A (front side), Deck A (reverse side),
Deck B (front side), Deck B (reverse side).
3 Press TAPE A (or TAPE B) (
(DECK A (or DECK B) ª · on
the remote).
Press TAPE A (or TAPE B) 9 to play
the reverse side. (Press DECK A (or
DECK B) ª · again on the remote to
play the reverse side.) The tape starts
playing.
Tips
•Pressing TAPE A (or TAPE B) ( or 9 when the
power is off automatically turns the power on and
starts tape playback if there is a tape in the deck
(One Touch Play).
•You can switch from another source to the tape
deck just by pressing TAPE A (or TAPE B) ( or
9 (Automatic Source Selection).
•When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” appears.
•When dubbing tapes originally recorded with
Dolby NR, the dubbed tape is automatically
played with Dolby NR.
continued
