27
Advanced Operations
Photo Recording
You can record a still picture like a photograph for about seven seconds. This mode is useful when
you want to enjoy a picture such as a photograph or when you print a picture using a video printer.
Shutter speed is automatically adjusted up to 1/1000 depending on the exposure.
(1) Set the standby switch to PHOTO STANDBY.
(2) Keep pressing PHOTO lightly until a still picture appears in the viewfinder.
To change the still picture, release PHOTO, select still picture again, and keep pressing PHOTO lightly
again.
If you press the PHOTO button on the Remote Commander when a still picture appears in the
viewfinder, the camcorder will record that still picture. However, you cannot select other still pictures
by using this button.
(3) Press PHOTO deeper.
The still picture in the viewfinder is recorded for about seven seconds. The sound during those seven
seconds is also recorded. If you change the POWER switch or the standby selector to other positions
while recording, this operation is performed after recording.
1
2,
3
