Other Information
41
Video
Audio
Dynamic Bass Response System (Subwoofer)
Problem Possible Remedies
No picture, no
sound
❏ Make sure the power cord is plugged in.
❏ If a red light is flashing on the front of your TV for more than a
few minutes, disconnect and reconnect the power cord. If the
problem continues, call your local service center.
❏ Check the TV/VIDEO setting: when watching TV, set it to TV;
when watching video equipment, set it to VIDEO 1, 2, 3, 4 or 5
(page 3).
❏ Make sure you have inserted the batteries correctly into the
remote control (page 2).
❏ Try another channel to rule out station trouble.
Poor or no picture,
good sound
❏ Adjust the Picture setting in the Video menu (page 24).
❏ Adjust the Brightness setting in the Video menu (page 25).
❏ Check the antenna and/or cable connections (page 10).
No color ❏ Adjust the Color setting in the Video menu (page 24).
Only snow appears
on the screen
❏ Check the Cable setting in the Channel Setup menu (page 28).
❏ Check the antenna and/or cable connections (page 10).
❏ Make sure the channel selected is currently broadcasting.
Dotted lines or
stripes
❏ Adjust the antenna.
❏ Move the TV away from other electronic equipment. Some
electronic equipment creates electrical noise, which can
interfere with TV reception.
Double images or
ghosts
❏ Check your outdoor antenna or call your cable service.
Problem Possible Remedies
Good picture, no
sound
❏ Press so that Muting disappears from the screen (page 3).
❏ Check your Audio settings. Your TV may be set to Auto SAP in
the MTS feature (page 27).
❏ Make sure the speaker option is set to On in the Audio Menu.
❏ Press to adjust your TV's volume.
Problem Possible Remedies
No sound
❏ Check the SUBWOOFER +/- inputs on the rear panel of the TV
to make sure the cables are connected correctly (see page 11).
