Additional Information
44
EN
Table of Setup Menus
You can make various settings on this deck by using Setup Menus. Operation related to each menu were explained
in the previous sections. The table below outlines each menu, including the various parameters and initial settings.
To enter the Setup Menu
While the deck is stopped, press MENU/NO twice to display “Setup Menu”,
or
press MENU/NO to display “Edit Menu” and turn AMS until “Setup ?” appears in the
display, then press AMS.
Menu number Function Parameters Initial setting See
01 Creates a program. page 23——
02 Sets the track marking function. T.Mark Off, T.Mark LSyn T.Mark LSyn
page 14
03 Sets the reference level of the input
signal when “T.Mark LSyn” is
selected in Setup Menu 02.
LS(T) –72 to –0dB LS(T) –50dB page 14
04 Turns the Auto Space and Auto
Pause Functions on and off.
Auto Off, Auto Space, Auto Pause Auto Off page 25
05 Turns the Smart Space and Auto
Cut Functions on and off.
S.Space Off, S.Space On S.Space On page 10
06 Turns the Peak Hold Function on
and off for the peak level meters.
P.Hold On, P.Hold Off P.Hold Off page 12
07 Sets the playing time during music
scan.
M.Scan 6 to 20s M.Scan 6s page 21
08
Sets the duration of fade-in
recording and playback.
F.in 1.0 to 15.0s
F.in 5.0s
page 17
09 Sets the duration of fade-out
recording and playback.
F.out 1.0 to 15.0s F.out 5.0s page 17
10 Adjusts the analog signal level
input through the LINE
(ANALOG) IN jacks.
Ain –∞ to +12.0dB Ain 0.0dB page 13
11 Adjusts the digital signal level input
through the DIGITAL OPTICAL IN
connector.
Opt –∞ to +12.0dB Opt 0.0dB page 12
12
Adjusts the digital signal level input
through the DIGITAL COAXIAL IN
connector.
Coax –∞ to +12.0dB Coax 0.0dB page 12
13 Adjusts the analog signal level
output to the LINE (ANALOG) OUT
and PHONES jacks.
Aout –20.0 to 0.0dB Aout 0.0dB
page 25
14 Sets the duration of the Sleep Timer. Sleep 30 to 120min Sleep 60min page 27
15 Turns the Sleep Timer Function on
and off.
Sleep On, Sleep Off Sleep Off page 27
