Using Surround Sound
18
GB
a) Adjustable only when the center mode is set to PHANTOM,
NORMAL or WIDE (see page 16).
b) Adjustable only when the center mode is set to 3 STEREO,
NORMAL or WIDE (see page 16).
Sound field mode
Off
On
Type
––
CINEMA
VIRTUAL
MUSIC
Adjustable parameters for each sound field when selecting program source
MODE
––
PRO LOGIC
C STUDIO
DOLBY V
HALL
Sound field mode
Off
On
Type
––
CINEMA
VIRTUAL
Adjustable parameters for each sound field when using DVD/MULTI CH
MODE
––
C STUDIO
V SURR
Test tone output
In the following order:
front (L), center, front (R),
surround (R) and surround (L)
In the following order:
front (L), center and front (R)
Adjusting the delay time (PRO LOGIC sound
field only)
You can make the surround sound more effective by
delaying the output from the surround speakers (delay
time). You can select from three delay times, S (15 mS),
M (20 mS), and L (30 mS). For example, if you’ve
placed the surround speakers in a large room or apart
from your listening position, set the delay time shorter.
1 Start playing a program source encoded with
Dolby Surround sound.
2 Press SURR.
The current delay time appears in the display.
3 Press MENU +/– to select the level you prefer,
such as “DELAY S”, “DELAY M” or “DELAY L”.
Parameters
DELAY EFFECT
SURROUND CENTER SUB WOOFER
r
rr
a)
r
b)
r
rr
a)
r
b)
r
rr
rr r
Parameters
DELAY EFFECT
SURROUND CENTER SUB WOOFER
rr r
rrr r
rrr
Note
To adjust the speaker volume using a test tone as described
on page 17, select the PRO LOGIC sound field. The test tone
output in all other sound fields is used for verifying whether
there is output from speakers or not.
Test tone output
No sound
Depends on center mode (see
page 16)
No sound
From the front and the
surround speakers alternately
