7
US
Getting Started
Name Function
A ON/STANDBY
lamp
Lights up in green when the
receiver is turned on.
Lights up in red when the
receiver is set to standby
mode.
B POWER Press to turn the receiver on
or off (page 6, 35, 46, 47,
55).
C TONE MODE Adjusts the tonal quality
(bass/treble level) of the
front, center and surround
speakers.
Press TONE MODE
repeatedly to select bass or
treble level, then turn
TONE +/– to adjust the
level (page 90).
TONE +/–
D TUNING +/– Turn to scan a station (page
96, 98).
E TUNING MODE Press to select the tuning
mode (page 96, 99, 114).
F Remote sensor Receives signals from
remote commander.
G MULTI
CHANNEL
DECODING lamp
Lights up when multi
channel audio signals are
decoded (page 47).
H Display The current status of the
selected component or a list
of selectable items appears
here (page 85).
I DISPLAY Press to select information
displayed on the display
(page 84, 113).
J INPUT MODE Press to select the input
mode when the same
components are connected
to both digital and analog
jacks (page 81).
K MASTER
VOLUME
Turn to adjust the volume
level of all speakers at the
same time (page 45, 46,
47).
L INPUT
SELECTOR
Turn to select the input
source to playback (page
44).
M Digital Cinema
Sound lamp
Lights up when a sound
field with DCS is
selected (page 54).
Name Function
N 2CH/A.DIRECT Press to select a sound field
(page 96).
A.F.D.
MOVIE
MUSIC
O DIMMER Press to adjust the
brightness of the display
(page 93).
P MEMORY/
ENTER
Press to store a station or
enter the selection when
selecting the settings
(page 97).
Q AUTO CAL MIC
jack
Connects to the supplied
optimizer microphone for
the Auto Calibration
function (page 40).
R VIDEO 2 IN/
PORTABLE AV
IN jacks
Connects to a portable
audio/video component
such as a camcorder or
video game (page 30, 45).
S PHONES jack Connects to headphones
(page 109).
T SPEAKERS
(OFF/A/B/A+B)
Press to select the speaker
system (page 39).
