43
GB
Tuner Operations
(USA, Canada and Mexico
models only)
You can change the AM tuning scale to
either 9 kHz or 10 kHz using the buttons on
the receiver.
1 Press ?/1 to turn off the receiver.
2 While holding down TUNING
MODE, press ?/1 on the receiver.
The current AM tuning scale is
changed to 9 kHz (or 10 kHz).
To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure above.
• Depending on the settings, the receiver may take
some time to change the AM tuning scale.
• All preset stations will be erased when you
change the tuning scale.
Presetting FM/AM radio
stations
(Preset Memory)
You can store up to 30 FM and 30 AM
stations as your favorite stations.
1 Tune to the station that you want to
preset using Auto Tuning (page 42)
or Direct Tuning (page 42).
2 Select “Preset Memory”, then
press .
3 Select a preset number, then press
.
The station is stored as the selected
preset number.
4 Repeat steps 1 to 3 to store
another station.
You can store station as follows:
• AM band: AM 1 to AM 30
• FM band: FM 1 to FM 30
1 Select “FM” or “AM” from the
menu, then press .
2 Select “Select Preset”, then press
.
3 Select the preset station you want,
then press .
Preset numbers from 1 to 30 are
available.
Changing the AM tuning
scale
Notes
?/1
TUNING MODE
Tuning to preset
stations
OPTIONS
V/v/B/b,
